Die elastic deformation in cold forging

Recently some special functions of precision simulation of forging processes with elastic deformation of dies considered was improved, which are now ready to be supported as beta-version for users.

These predictions are typical applications to axi-symmetric cold forging processes. Die structural analysis of the left predictions was conducted using the post-processor after simulating the forging process by rigid-plastic function. Of course, these predictions are quite different from the solutions obtained by the elastoplastic function considering both material and dies at the same time. The maximum displacement of die, 13.7 mm, in this case, cannot be accepted. The solutions are correct but it is owing to the limitation of theory of rigid-plasticity.

Max. Displacement: 13.7 mm

Max. Displacement: 0.4 mm

소성가공 성형해석에 대해 궁금한 점이 있으신가요?
AFDEX와 함께하세요

궁금하신 점이 있으시다면 언제든 문의해주세요.

주소
경상남도 진주시 동부로169번길 12, 윙스타워 A1208
TEL
055-755-7529
FAX
055-761-7529
E-MAIL
mfrc@afdex.com
주소
경상남도 진주시 동부로169번길 12, 윙스타워 A1208
TEL 055-755-7529
FAX 055-761-7529
E-MAIL mfrc@afdex.com

Copyright ⓒ 2025 MFRC Co., Ltd. All Rights Reserved