[Hot Forging]Simulation of shaft fork hot forging process

An iso-thermal analysis of a shaft fork hot forging process was conducted. The animation shows the change of contact surface with emphasis on mesh density along the boundaries of the die-material interface. Because metal forming simulation is solving the boundary value problem, the mesh density along the boundaries of the die-material interface is of great importance to minimize the numerical change of boundary conditions between before and after remeshings.

소성가공 성형해석에 대해 궁금한 점이 있으신가요?
AFDEX와 함께하세요

궁금하신 점이 있으시다면 언제든 문의해주세요.

주소
경상남도 진주시 동부로169번길 12, 윙스타워 A1208
TEL
055-755-7529
FAX
055-761-7529
E-MAIL
mfrc@afdex.com
주소
경상남도 진주시 동부로169번길 12, 윙스타워 A1208
TEL 055-755-7529
FAX 055-761-7529
E-MAIL mfrc@afdex.com

Copyright ⓒ 2025 MFRC Co., Ltd. All Rights Reserved