Prediction of grain size and experimental verification of hot forged bearing components

The grain size was predicted during hot forging and the validity of the results was verified. The material constants were obtained using AFDEX’s unique optimization technique for the single stage upsetting process of the three-stage process. When compared with the experimental results, it is concluded that the error is about 10%, which can be lower than the temperature dependency of the material constants.

소성가공 성형해석에 대해 궁금한 점이 있으신가요?
AFDEX와 함께하세요
궁금하신 점이 있으시다면 언제든 문의해주세요.