[Hot Forging]3D simulation of an axi-symmetric forging process

An axi-symmetric hot forging process was simulated using a rigid-viscoplastic finite element method. This axi-symmetric process is characterized by three-dimensional material flow near the inner radius due to compressive circumferential stress, which causes a kind of buckling. Mesh system with effective strain is shown in the figure and animation.

소성가공 성형해석에 대해 궁금한 점이 있으신가요?
AFDEX와 함께하세요

궁금하신 점이 있으시다면 언제든 문의해주세요.

주소
경상남도 진주시 동부로169번길 12, 윙스타워 A1208
TEL
055-755-7529
FAX
055-761-7529
E-MAIL
mfrc@afdex.com
주소
경상남도 진주시 동부로169번길 12, 윙스타워 A1208
TEL 055-755-7529
FAX 055-761-7529
E-MAIL mfrc@afdex.com

Copyright ⓒ 2025 MFRC Co., Ltd. All Rights Reserved