재료 유동특성

Metallurgical identification of material

Fig. (a) shows predictions of grain size with known material properties and…

Deformation behavior of tensile testing of SCM435 and ESW105

The deformation of tensile specimens was analyzed for two materials, SCM435 and…

Comparison of forming load-stroke curves

Comparison of effective stress exerted on the dies at the final stroke

Comparison of interfacial stresses (Stage 4)

Comparison of interfacial stresses (Stage 3)

Application of the new material properties (Effective strain)

Comparison of AFDEX MAT’s flow stress predictions and experimental data from tensile tests

With the flow stresses obtained by AFDEX MAT, the three tensile tests…

Converting engineering stress-strain to true stress-strain curve with AFDEX MAT

Three typical materials, i.e., SCM435, ESW95 and ESW105 were studied to reveal…

Tensile test simulation using AFDEX MAT

AFDEX MAT is a material identification module based on tensile test of…

소성가공 성형해석에 대해 궁금한 점이 있으신가요?
AFDEX와 함께하세요

궁금하신 점이 있으시다면 언제든 문의해주세요.

주소
경상남도 진주시 동부로169번길 12, 윙스타워 A1208
TEL
055-755-7529
FAX
055-761-7529
E-MAIL
mfrc@afdex.com
주소
경상남도 진주시 동부로169번길 12, 윙스타워 A1208
TEL 055-755-7529
FAX 055-761-7529
E-MAIL mfrc@afdex.com

Copyright ⓒ 2025 MFRC Co., Ltd. All Rights Reserved