[Hot Forging]Simulation of shaft fork hot forging process

An iso-thermal analysis of a shaft fork hot forging process was conducted. The animation shows the change of contact surface with emphasis on mesh density along the boundaries of the die-material interface. Because metal forming simulation is solving the boundary value problem, the mesh density along the boundaries of the die-material interface is of great importance to minimize the numerical change of boundary conditions between before and after remeshings.

Do you have any questions
about metal forming simulations?

Send us your comment, question or suggestion, or make a request.
We'll be in touch as soon as we can.

Address
Wings Tower A1208, 12 Dongbu-ro 169beon-gil,
Jinju, Gyeongsangnam-do, Republic of Korea, 52818
TEL
+82-55-755-7529
FAX
+82-55-761-7529
E-MAIL
mfrc@afdex.com
Address
Wings Tower A1208, 12 Dongbu-ro 169beon-gil, Jinju, Gyeongsangnam-do, Republic of Korea, 52818
TEL +82-55-755-7529
FAX +82-55-761-7529
E-MAIL mfrc@afdex.com

Copyright ⓒ 2025 MFRC Co., Ltd. All Rights Reserved