Material-Characterization

Metallurgical identification of material

Fig. (a) shows predictions of grain size with known material properties and…

Deformation behavior of tensile testing of SCM435 and ESW105

The deformation of tensile specimens was analyzed for two materials, SCM435 and…

Comparison of forming load-stroke curves

Comparison of effective stress exerted on the dies at the final stroke

Comparison of interfacial stresses (Stage 4)

Comparison of interfacial stresses (Stage 3)

Application of the new material properties (Effective strain)

Comparison of AFDEX MAT’s flow stress predictions and experimental data from tensile tests

With the flow stresses obtained by AFDEX MAT, the three tensile tests…

Converting engineering stress-strain to true stress-strain curve with AFDEX MAT

Three typical materials, i.e., SCM435, ESW95 and ESW105 were studied to reveal…

Tensile test simulation using AFDEX MAT

AFDEX MAT is a material identification module based on tensile test of…

Do you have any questions
about metal forming simulations?

Send us your comment, question or suggestion, or make a request.
We'll be in touch as soon as we can.

Address
Wings Tower A1208, 12 Dongbu-ro 169beon-gil,
Jinju, Gyeongsangnam-do, Republic of Korea, 52818
TEL
+82-55-755-7529
FAX
+82-55-761-7529
E-MAIL
mfrc@afdex.com
Address
Wings Tower A1208, 12 Dongbu-ro 169beon-gil, Jinju, Gyeongsangnam-do, Republic of Korea, 52818
TEL +82-55-755-7529
FAX +82-55-761-7529
E-MAIL mfrc@afdex.com

Copyright ⓒ 2025 MFRC Co., Ltd. All Rights Reserved